Cricut Explore & Silhouette Cameo Setting for TeckWrap Craft Vinyl

Cricut Explore & Silhouette Cameo Setting for TeckWrap Craft Vinyl

It can be difficult to find a right cut setting for your cutting machine. That's why we post these settings we have tested on our machines to help you address the concerns. For your convenience, we will present each right cut setting on Cricut Explore Air 2 ,Silhouette Cameo 3 and Cricut Joy. 
Cricut Explore Air 2 
On Cricut Explore Air 2, we recommend regular vinyl setting and have the cut pressure set at 220 which can be used with all TeckWrap craft vinyls. Silhouette Cameo 3
 Choose type of material closest to the vinyl you will be using. This will get you to a good starting point. Here we choose vinyl, metallic. For blade type, we go for autoblade which will automatically adjust itself to the thickness you have set in the software. After that, we adjust blade at 1, speed at 4 and force at 15. It turned out this setting cuts our vinyl perfectly.
Cricut Joy
Insert your image in Design Space and head to make it.You will see a little box popping up on screen. Our material allows you to cut without mat, so you can simply click or tap without mat. Now you are going to select smart vinyl permanent with default pressure. Load your material when everything is settled.
Cut settings differ from each machines. A test cut is always recommended before you get your hands on your projects. 
Back to blog