Design Supplies patterned HTV can be applied to:
*Poly/cotton blends *100% Cotton *100% Polyester * Lycra/spandex
1. Choose the design you would like to cut.
2. Check your vinyl settings are correct.
3. Cut your patterned heat transfer vinyl colour side up and do not mirror your design.
4. Once weeded apply your heat transfer mask TTD. Rub firmly with a squeegee to adhere the design to the transfer mask.
5. Remove fine plastic film from the vinyl backing.
6. Place the design onto your item and press for 5 seconds at 160 degrees with firm pressure. Hot peel.
Please note these instructions are only for our patterned HTV range of vinyl’s.
Wait for 24 hours before washing. Wash in warm water with a mild detergent. Do not dry clean.