Skip to product information
1 of 1

Resin 1.5L

Resin 1.5L

Regular price $139.00 NZD
Regular price Sale price $139.00 NZD
Sale Sold out
Tax included. Shipping calculated at checkout.

 

 

Part A Base

Part B Hardener

Mixation is 2:1

This is a laminating resin for keychains, timber, concrete, jewelry, and other materials. It has outstanding clarity and UV resistance. In addition to laminating it can be used as an adhesive, and a clear finish coat. It is particularly suited for a clear coat for artwork. 

You will only need to mix up the tiniest bit. 7.5ml (5ml Part A + 2.5ml Part B) is enough to do roughly 3x 3inch acrylic blanks. Work quickly as it does start to thicken rather quickly.

Let rest for 5 minutes before using to allow the bubbles to surface.DO NOT OVER STIR. Stir gently so to limit the bubbles. If you can see bubbles on your project once the resin has been applied, blow gently over top or use a lighter to help bring the bubbles to the surface.

Lie flat until completely dry. Curing time is 8hours - Low odor.

Must be used in a well ventilated area wearing protective gear. Best results are from curing in 20°c. If you have your resin curing in cooler temperatures please note this will take much longer, and may still be sticky to the touch if too cool.

Does not require a UV lamp. 

This is a UV Resistant Resin which means it will not yellow in the sun.

Please read enclosed directions before starting your project. - Not food safe.

Keep out of reach of children.

Only available for shipping within New Zealand.

View full details